Black ABS Plastic Disk-Shaped Hex Bolt Cover Cap for 1/4" Diameter Bolts (7/16" Wrench Size)

Black ABS Plastic Disk-Shaped Hex Bolt Cover Cap for 1/4" Diameter Bolts (7/16" Wrench Size) Give your application a professional finished appearance by hiding unsightly hex bolt heads and nuts. Be sure to check your existing hardware and compare with our dimensions below to make sure they will work in your application. When covering hex nuts, a thinner jam nut must be used (if it will work safely in your application) so be aware that there can't be too much excess threaded bolt shaft protruding past the nut, or cap cover will not completely cover the nut itself.

Features:

These disk-shaped caps are made of durable high-impact black ABS plastic with gloss finish

Suitable for indoor or outdoor use

Installs in seconds without disassembly of existing application

Simply press-on over Hex head for installation

Snaps on tightly and will not fall off due to vibration

Fits hex bolt heads that require a 7/16" wrench size <

Outside diameter of cap: .646"

Thickness (height) of cap: .312

Shape: Cylindrical Disk with slight oval top (click on main stock photo to enlarge it)

Maximum depth of recess for covering a nut or bolt hex head: .240"

If you need large quantities, contact us for wholesale pricing

Not suitable for installation on or near a hot engine or exhaust. ABS has a relatively low melting point

- Photo shows more than one for display purposes only