11" Long Grips for 2" x 2" Square Tubing - High Density Rubber - (Closed One End)

11" Long Grips for 2" x 2" Square Tubing - High Density Rubber - (Closed One End))

These grips are made of the exact same high density rubber of most of the other grips we offer - only they are square!. Simply coat the inside of this grip with a liberal amount of rubbing alcohol and they slide right on. The ends of the 2" square tube do not need to be capped off. A hollow tube is fine as long as rubbing alcohol is used. The alcohol will evaporate in about an hour after installation thus, leaving the grip tight over the 2" square tube.

Great for covering dip bars, parallel bars, various grab handles, or even racks - as long as the tube is 2" x 2" outside dimension, these rubber grips will fit perfect.

The enlarged photo will show the slightly pyramidal configuration of the end of the grip which is a nice aesthetic touch as compared to the alternative boring squared of end.

Grips may be cut down to size using a razor blade or scissors if 11" is too long.

Contact us if you need a quote on a larger number of handle grips.

Features

Fits any 2" x 2" square tubing as long as the end is free to accept grip

Inside Length: 11" (grip covers 11" from tube end)

Outside Length: 11-1/2" - The extra 1/2" is due to addition of pyramid shaped end as shown in photo

The wall thickness of the grip material itself is .115" thick, such that the outside dimension of an installed grip is 2.230" x 2.230"

Made of High Density Rubber - Soft to touch, yet firm to grip - not "spongy" like foam rubber.

Closed-cell structure - won't absorb fluids - easy to clean

Non-slip textured surface for a confident grip

Installs easily over the end of tube using plenty of rubbing alcohol

Made in USA!

Ask about large quantity discounts

This is a unique part!